OCR'd and cleaned up version of the DTC11-EM Monitor listing from the
EK-DTCEM-UG-001.pdf file.

The checksum of the resulting binary image, after assembly, is 0, which
is correct.

The files are:

dct11-em.lst      Cleaned up OCR of the file
dct11-em.mac      Source file reverse-engineered from dct11-em.lst
dct11-em_E45.bin  Image of high byte 2764 EPROM (E45 on schematic)
dct11-em_E53.bin  Image of low byte 2764 EPROM (E53 on schematic)

Note that the EPROM images were generated from the output of assembling
the source code.  The unused portion (representing locations 120000 - 132777
have been set to all zeroes).  These have not been tested, nor have they
been compared against the real EPROMs.
