TMS320F206 DIGITAL SIGNAL PROCESSOR

SPRS050A - NOVEMBER 1996 - REVISED APRIL 1998

features

High-Performance Static CMOS Technology
Includes the T320C2xLP Core CPU
TMS320F206 is a Member of the TMS320C20x Generation, Which Also Includes the TMS320C203, and TMS320C209 Devices
Instruction-Cycle Time 50 ns @ 5 V
Source Code Compatible With TMS320C25
Upwardly Code-Compatible With TMS320C5x Devices
Three External Interrupts
TMS320F206 Integrated Memory:
- 544 × 16 Words of On-Chip Dual-Access Data RAM
- 32K × 16 Words of On-Chip Flash Memory (EEPROM)
- 4K × 16 Words of On-Chip Single-Access Program/Data RAM
224K × 16-Bit Maximum Addressable External Memory Space
- 64K Program
- 64K Data
- 64K Input/Output (I/O)
- 32K Global
32-Bit ALU/Accumulator
16 × 16-Bit Multiplier With a 32-Bit Product
Block Moves from Data and Program Space
TMS320F206 Peripherals:
- On-Chip 16-Bit Timer
- On-Chip Software-Programmable Wait-State (0 to 7) Generator
- On-Chip Oscillator
- On-Chip Phase-Locked Loop (PLL)
- Six General-Purpose I/O Pins
- Full-Duplex Asynchronous Serial Port (UART)
- Enhanced Synchronous Serial Port (ESSP) With Four-Level-Deep FIFOs
Input Clock Options
- Options - Multiply-by-One, -Two, or -Four and Divide-by-Two
Support of Hardware Wait States
Power Down IDLE Mode
IEEE 1149.1^†-Compatible Scan-Based Emulation
100-Pin Thin Quad Flat Package (TQFP) (PZ Suffix)
^† IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.

description

The TMS320F206 Texas Instruments (TI^TM) digital signal processor (DSP) is fabricated with static CMOS integrated-circuit technology, and the architectural design is based upon that of the TMS320C20x series, optimized for low-power operation. The combination of advanced Harvard architecture, on-chip peripherals, on-chip memory, and a highly specialized instruction set is the basis of the operational flexibility and speed of the 'F206.

The 'F206 offers these advantages:

32K 16 words on-chip flash EEPROM reduces system cost and facilitates prototyping
Enhanced TMS320 architectural design for increased performance and versatility
Advanced integrated-circuit processing technology for increased performance
'F206 devices are pin- and code-compatible with 'C203 devices.
Source code for the 'F206 DSP is software-compatible with the 'C1x and 'C2x DSPs and is upwardly compatible with fifth-generation DSPs ('C5x)
New static-design techniques for minimizing power consumption and increasing radiation tolerance

Table 1 shows the capacity of on-chip RAM and ROM, the number of serial and parallel I/O ports, the execution time of one machine cycle, and the type of package with total pin count of the TMS320F206 device.

Title: TMS320F206 DIGITAL SIGNAL PROCESSOR
Product Family: TMS320C2000 PLATFORM
Device Functionality: DSP, 16 BIT FIXED POINT,5V,20 MIPS, FLASH EPROM
Orderable Devices: TMS320F206PZ, TMX320F206PZ

View the complete PDF datasheet: sprs050a.pdf (734 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:TMS320F206

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.