SLVS021E - JANUARY 1988 - REVISED OCTOBER 1996
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for battery-powered systems. The TL750M and TL751M incorporate on-board overvoltage and current-limit protection circuitry to protect both themselves and the regulated system. Both series are fully protected against 60-V load-dump and reverse battery conditions. Extremely low quiescent current, even during full-load conditions, makes the TL750M and TL751M series ideal for standby power systems.
The TL750M series of fixed-output voltage regulators offer 5-V, 8-V, 10-V, and 12-V options available in 3-lead KC (TO-220AB) and KTE plastic packages.
The TL751M series of fixed-output voltage regulators also offer 5-V, 8-V, 10-V, and 12-V options with the addition of an enable input. The enable input gives the designer complete control over power up, allowing sequential power up or emergency shutdown. When taken high, the enable input places the regulator output in a high-impedance state. It is completely TTL- and CMOS-compatible. The TL751M series is offered in 5-lead KTG plastic packages.
The TL750MxxC and TL751MxxC are characterized for operation from 0°C to 125°C virtual junction temperature, and the TL750MxxQ and TL751MxxQ series are characterized for operation from -40°C to 125°C virtual junction temperature. The TL751M05M and TL751M12M are characterized for operation over the full military temperature range of -55°C to 125°C.
View more information about generic part numbers:TL750M05, TL750M08, TL750M10, TL750M12, TL751M05, TL751M05M, TL751M08, TL751M10, TL751M12, TL751M12M
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.