Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

TUSB2040 4-PORT HUB FOR THE UNIVERSAL SERIAL BUS

SLLS260B - NOVEMBER 1996 - REVISED AUGUST 1997


Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

features

description

The TUSB2040 hub is a CMOS device that provides up to four downstream ports in conformance with the USB specification, version 1.0. It supports two power source modes: bus-powered and self-powered. The hub and downstream ports share the same power source. The TUSB2040 hub powers down to 20 nA during the suspend operation by powering down the internal oscillator.

The TUSB2040 hub supports power switching to the downstream ports either individually or ganged. An external device or devices are required to switch power and to detect overcurrent conditions. The TUSB2040 provides outputs to control power switching and inputs to monitor any overcurrent conditions. In the ganged operation, all PWRON\ signals transition simultaneously, and any OVRCUR\ input may be used.

JEDEC descriptor S-PQFP-G for thin quad flatpack (TQFP)

The hub requires a 48-MHz clock signal to sample data from the upstream port and generate a synchronized 12-MHz USB clock signal. The hub supports the flexibility to use either a 48-MHz oscillator or a crystal tuned to 48-MHz. If an oscillator is used, connect its output to the XTAL1 terminal and leave the XTAL2 terminal open. An oscillator with TTL output may be used if the output does not exceed 3.6 V. For a crystal implementation, use the XTAL1 terminal as the input and the XTAL2 terminal as the feedback path to the crystal. Because the crystal is required to resonate at 48-MHz, a tuning circuit as shown in Figure 6 may be required.

USB-compliant transceivers are provided for the upstream port and all downstream ports. Every downstream port supports both full- and low-speed connection by automatically setting the slew rate according to the speed of the device attached to the port.


Title: 4-PORT HUB FOR THE UNIVERSAL SERIAL BUS
Product Family: ADVANCED BUS SOLUTIONS
Device Functionality: 4-PORT HUB FOR THE UNIVERSAL SERIAL BUS
Orderable Devices: TUSB2040N, TUSB2040PT

View the complete PDF datasheet: slls260b.pdf (211 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:TUSB2040

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!