Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN75LV4737A 3.3-V/5-V MULTICHANNEL RS232 LINE DRIVER/RECEIVER

SLLS178A - APRIL 1994 - REVISED NOVEMBER 1994


features

description

The SN75LV4737A[Dagger] consists of three line drivers, five line receivers, and a charge-pump circuit. It provides the electrical interface between an asynchronous communication controller and the serial-port connector and meets the requirements of EIA/TIA-232-E. This combination of drivers and receivers matches those needed for the typical serial port used in an IBM PC/AT or compatibles. The charge pump and five small external capacitors allow operation from a single 3.3-V supply and four capacitors for operation from a 5-V supply.

The device has flexible control options for power management when the serial port is inactive. A common disable for all of the drivers and receivers is provided with the active-high STBY input. The active-low EN\ input is an enable for one receiver to implement a wake-up feature for the serial port. All the logic inputs can accept signals from controllers operating from a 5-V supply even though the SN75LV4737A is operating from 3.3 V.

The SN75LV4737A is characterized for operation over the temperature range of 0°C to 70°C.


Title: 3.3-V/5-V MUTICHANNEL RS232 LINE DRIVER/RECEIVER
Product Family: TRANSMITTERS AND RECEIVERS
Device Functionality: TRANSMITTERS/RECEIVERS
Orderable Devices: SN75LV4737ADBLE

View the complete PDF datasheet: slls178a.pdf (174 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN75LV4737A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!