SN75ALS1177, SN75ALS1178 DUAL DIFFERENTIAL DRIVERS AND RECEIVERS

SLLS154A- MARCH 1993 - REVISED MAY 1995

features

• Meets or Exceeds Standards EIA/TIA-422-B, RS-485, CCITT Recommendation V.11
• Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
• Low Supply Current Requirement 50 mA Max
• Driver Positive- and Negative-Current Limiting
• Driver Common-Mode Output Voltage Range of -7 V to 12 V
• Thermal Shutdown Protection
• Driver 3-State Outputs Active-High Enable
• Receiver Common-Mode Input Voltage Range of -12 V to 12 V
• Receiver Input Sensitivity . . . ±200 mV
• Receiver Hysteresis . . . 50 mV Typ
• Receiver High Input Impedance 12 k Min
• Receiver 3-State Outputs Active-Low Enable for SN75ALS1177 Only
• Operates From Single 5-V Supply

description

The SN75ALS1177 and SN75ALS1178 dual differential drivers and receivers are monolithic integrated circuits designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced trans- mission lines and meet standards EIA/TIA-422-B, RS-485, and CCITT Recommendation V.11.

The SN75ALS1177 combines dual 3-state differential line drivers and dual 3-state differential input line receivers, both of which operate from a single 5-V power supply. The drivers and receivers have active-high and active-low enables, respectively, which can be externally connected together to function as direction control. The SN75ALS1178 drivers each have an individual active-high enable. Fail-safe design ensures that when the receiver inputs are open, the receiver outputs are always high.

The SN75ALS1177 and SN75ALS1178 are characterized for operation from 0°C to 70°C.

View more information about generic part numbers:SN75ALS1177, SN75ALS1178

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!