SN65175, SN75175 QUADRUPLE DIFFERENTIAL LINE RECEIVERS

SLLS145B - OCTOBER 1990 - REVISED MAY 1995

features

Meet or Exceed the Requirements of ANSI Standard EIA/TIA-422-B, RS-423-B, and RS-485
Meet ITU Recommendations V.10, V.11, X.26, and X.27
Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
3-State Outputs
Common-Mode Input Voltage Range -12 V to 12 V
Input Sensitivity...±200 mV
Input Hysteresis...50 mV Typ
High Input Impedance...12 kΩ Min
Operate From Single 5-V Supply
Low-Power Requirements
Plug-In Replacement for MC3486

description

The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10megabits per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from -40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.

H = high level, L = low level, ? = indeterminate, X = irrelevant, Z = high impedance (off)

Title: QUADRUPLE DIFFERENTIAL LINE RECEIVER
Product Family: TRANSMITTERS AND RECEIVERS
Device Functionality: TRANSMITTERS/RECEIVERS
Orderable Devices: SN65175D, SN65175DR, SN75175D, SN75175DR, SN75175J, SN75175N

View the complete PDF datasheet: slls145b.pdf (144 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN65175, SN75175

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.