SN75ALS163 OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVER

SLLS021D - JUNE 1986 - REVISED FEBRUARY 1993

features

• 8-Channel Bidirectional Transceiver
• High-Speed Advanced Low-Power Schottky Circuitry
• Low Power Dissipation . . . 46 mW Max per Channel
• Fast Propagation Times . . . 20 ns Max
• High-Impedance PNP Inputs
• Receiver Hysteresis . . . 650 mV Typ
• Open-Collector Driver Output Option
• No Loading of Bus When Device Is Powered Down (V_CC = 0)
• Power-Up/Power-Down Protection (Glitch Free)

description

The SN75ALS163 octal general-purpose interface bus transceiver is a monolithic, high- speed, advanced low-power Schottky device. It is designed for two-way data communications over single-ended transmission lines. The transceiver features driver outputs that can be operated in either the open-collector or 3-state mode. If talk enable (TE) is high, these outputs have the characteristics of open-collector outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places the outputs in the high-impedance state. The driver outputs are designed to handle loads of up to 48 mA of sink current. Each receiver features pnp transistor inputs for high input impedance and 400 mV minimum of hysteresis for increased noise immunity.

Output glitches during power up and power down are eliminated by an internal circuit that disables both the bus and receiver outputs. The outputs do not load the bus when V_CC = 0.

The SN75ALS163 is characterized for operation from 0°C to 70°C.

View more information about generic part numbers:SN75ALS163

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!