SN75ALS126 QUADRUPLE LINE DRIVER

SLLS016C - FEBRUARY 1986 - REVISED FEBRUARY 1993

features

Meets IBM 360/370 I/O Interface Specification GA22-6974-3 (Also See SN75ALS130)
Minimum Output Voltage of 3.11 V at I_OH = -60 mA
Fault-Flag Circuit Output Signals Driver Output Fault
Fault-Detection Current Limit Circuit Minimizes Power Dissipation During a Fault Condition
Advanced Low-Power Schottky Circuitry
Dual Common Enable
Individual Fault Flags
Designed to Be an Improved Replacement for the MC3481

description

The SN75ALS126 quadruple line driver is designed to meet the IBM 360/370 I/O specification GA22-6974-3. The output voltage is

3.11 V minimum (at I_OH = -59.3 mA) over the recommended ranges of supply voltage (4.5 V to 5.95 V) and temperature. Driver outputs use a fault-detection current-limit circuit to allow high drive current but still minimize power dissipation when the output is shorted to ground. The SN75ALS126 is compatible with standard TTL logic and supply voltages.

The SN75ALS126 employs the IMPACT^TM process to achieve fast switching speeds and low power dissipation. Fault-flag circuitry is designed to sense and signal a line short on any Y line. Upon detecting an output fault condition, the fault-flag circuit forces the driver output into a low state and signals a fault condition by causing the fault-flag output to go low.

The SN75ALS126 can drive a 50- load as required in the IBM GA22-6974-3 specification or a 90- load as used in many I/O systems. Optimum performance can be achieved when the device is used with either the SN75127, SN75128, or SN75129 line receivers.

The SN75ALS126 is characterized for operation from 0°C to 70°C.

Title: QUADRUPLE LINE DRIVER
Product Family: TRANSMITTERS AND RECEIVERS
Device Functionality: QUADRUPLE LINE DRIVER

View the complete PDF datasheet: slls016c.pdf (88 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN75ALS126

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.