SN65512C, SN75512CVACUUM FLUORESCENT DISPLAY DRIVERS

SLDS054 - D3516, MAY 1990

features

Each Device Drives 12 Lines
60-V Output Voltage Swing Capability
25-mA Output Source Current Capability
High-Speed Serially-Shifted Data Input
TTL-Compatible Inputs
Latches on All Driver Outputs

description

The SN65512C and SN75512C are monolithic BIDFET

integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display.

All device inputs are diode-clamped pnp inputs and assume a high logic level when open circuited. The nominal input threshold is 1.5V. Outputs are totem-pole structures formed by an npn emitter follower and double-diffused MOS (DMOS) transistors.

The device consists of a 12-bit shift register, 12latches, and 12 output AND gates. Serial data is entered into the shift register on the low-to-high transition of CLOCK. When high, LATCH ENABLE transfers the shift register contents to the outputs of the 12 latches. The active-low STROBE input enables all Q outputs. Serial data output from the shift register can be used to cascade shift registers. This output is not affected by LATCH ENABLE or STROBE.

The SN65512C is characterized for operation from -40°C to 85°C. The SN75512C is characterized for operation from 0°C to 70°C.

Title: VACUUM FLUORESCENT DISPLAY DRIVERS
Product Family: PERIPHERAL DRIVERS AND ACTUATORS
Device Functionality: VACUUM FLUORESCENT DISPLAY DRIVER
Orderable Devices: SN65512CN, SN75512CN

View the complete PDF datasheet: slds054.pdf (82 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN65512, SN75512

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.