TLC0831C, TLC0831I TLC0832C, TLC0832I 8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL

SLAS107B - JANUARY 1995 - REVISED APRIL 1996

features

• 8-Bit Resolution
• Easy Microprocessor Interface or Standalone Operation
• Operates Ratiometrically or With 5-V Reference
• Single Channel or Multiplexed Twin Channels With Single-Ended or Differential Input Options
• Input Range 0 to 5 V With Single 5-V Supply
• Inputs and Outputs Are Compatible With TTL and MOS
• Conversion Time of 32 us at f_clock = 250 kHz
• Designed to Be Interchangeable With National Semiconductor ADC0831 and ADC0832
• Total Unadjusted Error . . . ± 1 LSB

description

These devices are 8-bit successive-approximation analog-to-digital converters. The TLC0831 has single input channels; the TLC0832 has multiplexed twin input channels. The serial output is configured to interface with standard shift registers or microprocessors.

The TLC0832 multiplexer is software configured for single-ended or differential inputs. The differential analog voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.

The operation of the TLC0831 and TLC0832 devices is very similar to the more complex TLC0834 and TLC0838 devices. Ratiometric conversion can be attained by setting the REF input equal to the maximum analog input signal value, which gives the highest possible conversion resolution. Typically, REF is set equal to V_CC (done internally on the TLC0832).

The TLC0831C and TLC0832C are characterized for operation from 0°C to 70°C. The TLC0831I and TLC0832I are characterized for operation from -40°C to 85°C.

View more information about generic part numbers:TLC0831, TLC0832

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!