TLC0834C, TLC0834I, TLC0838C, TLC0838I 8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL

SLAS094C - MARCH 1995 - REVISED APRIL 1997

features

• 8-Bit Resolution
• Easy Microprocessor Interface or Stand-Alone Operation
• Operates Ratiometrically or With 5-V Reference
• 4- or 8-Channel Multiplexer Options With Address Logic
• Input Range 0 to 5 V With Single 5-V Supply
• Remote Operation With Serial Data Link
• Inputs and Outputs Are Compatible With TTL and MOS
• Conversion Time of 32 us at f_clock = 250 kHz
• Functionally Equivalent to the ADC0834 and ADC0838 Without the Internal Zener Regulator Network
• Total Unadjusted Error . . . ±1 LSB

description

These devices are 8-bit successive-approximation analog-to-digital converters, each with an input-configurable multichannel multiplexer and serial input/output. The serial input/output is configured to interface with standard shift registers or microprocessors. Detailed information on interfacing with most popular microprocessors is readily available from the factory.

The TLC0834 (4-channel) and TLC0838 (8-channel) multiplexer is software configured for single-ended or differential inputs as well as pseudo-differential input assignments. The differential analog voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding of any smaller analog voltage span to the full 8 bits of resolution.

The TLC0834C and TLC0838C are characterized for operation from 0°C to 70°C. The TLC0834I and TLC0838I are characterized for operation from -40°C to 85°C.

View more information about generic part numbers:TLC0834, TLC0838

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!