TLC2543C, TLC2543I, TLC2543M 12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS

SLAS079D - DECEMBER 1993 - REVISED MAY 1997

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

features

12-Bit-Resolution A/D Converter
10-us Conversion Time Over Operating Temperature
11 Analog Input Channels
3 Built-In Self-Test Modes
Inherent Sample-and-Hold Function
Linearity Error...±1 LSB Max
On-Chip System Clock
End-of-Conversion Output
Unipolar or Bipolar Output Operation (Signed Binary With Respect to 1/2 the Applied Voltage Reference)
Programmable MSB or LSB First
Programmable Power Down
Programmable Output Data Length
CMOS Technology
Application Report Available

Microcontroller Based Data Acquisition Using the TLC2543 12-bit Serial-Out ADC (SLAA012)

description

The TLC2543C and TLC2543I are 12-bit, switched-capacitor, successive-approximation, analog-to- digital converters. Each device has three control inputs [chip select (CS\), the input-output clock (I/O CLOCK), and the address input (DATA INPUT)] and is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

The TLC2543C is characterized for operation from T_A = 0°C to 70°C. The TLC2543I is characterized for operation from T_A = -40°C to 85°C. The TLC2543M is characterized for operation from T_A = -55°C to 125°C.

Title: 12-BIT ANALOG-TO-DIGITAL CONVERTERS
Product Family: ANALOG TO DIGITAL
Device Functionality: DATA ACQ
Orderable Devices: 5962-9688601QRA, TLC2543CDB, TLC2543CDBLE, TLC2543CDW, TLC2543CDWR, TLC2543CFN, TLC2543CFNR, TLC2543CN, TLC2543IDB, TLC2543IDW, TLC2543IDWR, TLC2543IFN, TLC2543IFNR, TLC2543IN, TLC2543MJB

View the complete PDF datasheet: slas079d.pdf (408 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:TLC2543

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.