SMQ320C32 DIGITAL SIGNAL PROCESSOR

SGUS027 - APRIL 1998

features

Military Operating Temperature Range - 55°C to 125°C; QML Processing
High-Performance Floating-Point Digital Signal Processor (DSP) SMQ320C32-50 (5 V)
- 40-ns Instruction Cycle Time
- 275 MOPS
- 50 MFLOPS
- 25 MIPS
32-Bit High-Performance CPU
16-/32-Bit Integer and 32-/40-Bit Floating-Point Operations
32-Bit Instruction Word, 24-Bit Addresses
Two 256 × 32-Bit Single-Cycle, Dual-Access On-Chip RAM Blocks
Flexible Boot-Program Loader
On-Chip Memory-Mapped Peripherals:
- One Serial Port
- Two 32-Bit Timers
- Two-Channel Direct Memory Access (DMA) Coprocessor With Configurable Priorities
Enhanced External Memory Interface That Supports 8-/16-/32-Bit-Wide External RAM for Data Access and Program Execution From 16-/32-Bit-Wide External RAM
SMJ320C30 and SMJ320C31 Object Code Compatible
Fabricated Using 0.7-um Enhanced Performance Implanted CMOS (EPIC^TM) Technology by Texas Instruments
144-Pin Plastic Quad Flat Package (PCM Suffix) 5 V
Eight Extended-Precision Registers
Two Address Generators With Eight Auxiliary Registers and Two Auxiliary Register Arithmetic Units (ARAUs)
Two Low-Power Modes
Two- and Three-Operand Instructions
Parallel Arithmetic Logic Unit (ALU) and Multiplier Execution in a Single Cycle
Block-Repeat Capability
Zero-Overhead Loops With Single-Cycle Branches
Conditional Calls and Returns
Interlocked Instructions for Multiprocessing Support
One External Pin, PRGW, That Configures the External-Program-Memory Width to 16 or 32 Bits
Two Sets of Memory Strobes (STRB0\ and STRB1\) and One I/O Strobe (IOSTRB\) Allow Zero-Glue Logic Interface to Two Banks of Memory and One Bank of External Peripherals
Separate Bus-Control Registers for Each Strobe-Control Wait-State Generation, External Memory Width, and Data Type Size
STRB0\ and STRB1\ Memory Strobes Handle 8-, 16-, or 32-Bit External Data Accesses (Reads and Writes)
Multiprocessor Support Through the HOLD\ and HOLDA\ Signals Is Valid for All Strobes
EPIC is a trademark of Texas Instruments Incorporated.

description

The SMQ320C32 is a member of the '320C3x generation of digital signal processors from Texas Instruments. The SMQ320C32 is an enhanced 32-bit floating-point processor manufactured in 0.7-um triple-level-metal CMOS technology. The enhancements to the '320C3x architecture include a variable-width external-memory interface, faster instruction cycle time, power-down modes, two-channel DMA coprocessor with configurable priorities, flexible boot loader, relocatable interrupt-vector table, and edge- or level-triggered interrupts.

The internal busing and special digital signal processing instruction set of the SMQ320C32 have the speed and flexibility to execute up to 50 million floating-point operations per second (MFLOPS). The SMQ320C32 optimizes speed by implementing functions in hardware that other processors implement through software or microcode. This hardware-intensive approach provides performance previously unavailable on a single chip.

^† NC=No internal connection

Title: DIGITAL SIGNAL PROCESSOR
Product Family: TMS320C3X FLOATING POINT DSP
Device Functionality: 32 BIT FLOATING POINT,5V

View the complete PDF datasheet: sgus027.pdf (549 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SMQ320C32

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.