



SGMS019D - SEPTEMBER 1987 - REVISED OCTOBER 1997
The SMJ27C512 is a set of 65536 by 8-bit (524288-bit), ultraviolet (UV) light erasable, electrically programmable read-only memories. These devices are fabricated using power-saving CMOS technology for high speed and simple interface with MOS and bipolar circuits. All inputs (including program data inputs) can be driven by Series 54 TTL circuits without the use of external pullup resistors. Each output can drive one Series 54 TTL circuit without external resistors. The data outputs are 3-state for connecting multiple devices to a common bus. The SMJ27C512 is pin-compatible with existing 28-pin 512K ROMs and EPROMs. It is offered in a 600-mil dual-in-line ceramic package (J suffix) rated for operation from - 55°C to 125°C, the operating case temperature range (TC).
Because this EPROM operates from a single 5-V supply (in the read mode), it is ideal for use in microprocessor-based systems. One other supply (13 V) is needed for programming. All programming signals are TTL level. This device is programmable by the SNAP! Pulse programming algorithm. The SNAP! Pulse programming algorithm uses a VPP of 13 V and a VCC of 6.5 V for a nominal programming time of seven seconds. For programming outside the system, existing EPROM programmers can be used. Locations may be programmed singly, in blocks, or at random.
View more information about generic part numbers:SMJ27C512
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.



