TLC5502-5M 8-BIT ANALOG-TO-DIGITAL CONVERTER
SGLS067 - MARCH 1992
features
- LinEPICTM 1-um CMOS Process
- 8-Bit Resolution
- Differential Linearity Error...±0.2% Max
- Maximum Conversion Rate...20 MHz Typ ...10 MHz Min
- Analog Input Voltage Range ...0 V to VDD
- TTL Digital I/O Level
- Low Power Consumption...150 mW Typ
- 5-V Single-Supply Operation
description
The TLC5502-5M is a low-power ultra-high-speed 8-bit analog-to-digital converter that uses the
LinEPICTM
CMOS process. It utilizes the full parallel comparison (flash method) for high-speed conversion. Because of such high-speed capability, the TLC5502-5M is suitable for motor control, high-speed signal processing, and video or radar signal processing.Separate analog and digital supply pins are provided to reduce coupling between the high-speed digital switching sections and the lower-frequency analog signal comparators. This pin partitioning minimizes crosstalk and unwanted spurious signals.
The TLC5502-5M is characterized for operation from -55°C to 125°C.
During storage or handling, the device leads should be shorted together or the device should be placed in conductive foam. In a circuit, unused inputs should always be connected to an appropriated logic voltage level, preferably either VCC or ground. Specific guidelines for handling devices of this type are contained in the publication Guidelines for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments.
Title: 8-BIT ANALOG-TO-DIGITAL CONVERTER
Product Family: ANALOG TO DIGITAL
Device Functionality: 8-BIT ANALOG-TO-DIGITAL CONVERTER
View the complete PDF datasheet: sgls067.pdf (74 K Bytes) (Requires Acrobat Reader 3.x)View more information about generic part numbers:TLC5502-5M
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!