SGLS049 - NOVEMBER 1988 - REVISED OCTOBER 1991
Hz\ Typ, f = 10 HzHz\ Typ, f = 1 kHzAdvanced LinCMOS is a trademark of Texas Instruments Incorporated.
The TLC2654M and TLC2654AM are low-noise chopper-stabilized operational amplifiers using the Advanced LinCMOSTM process. Combining this process with chopper stabilization circuitry makes possible excellent dc precision. In addition, circuit techniques are added that give the TLC2654M and TLC2654AM noise performance unsurpassed by similar devices.
Chopper-stabilization techniques provide for extremely high dc precision by continuously nulling input offset voltage even during variations in temperature, time, common-mode voltage, and power supply voltage. The high chopping frequency of the TLC2654M and TLC2654AM provides excellent noise performance in a frequency spectrum from near dc to 10 kHZ. In addition, intermodulation or aliasing error is eliminated from frequencies up to 5 kHz.
This high dc precision and low noise, coupled with the extremely high input impedance of the CMOS input stage, makes the TLC2654M and TLC2654AM an ideal choice for a broad range of applications such as low-level, low-frequency thermocouple amplifiers and strain gauges, as well as wide-bandwidth and subsonic circuits. (For applications requiring even greater dc precision, use the TLC2652M or TLC2652AM device, which has a chopping frequency of 450 Hz.)
The TLC2654M and TLC2654AM input common-mode input voltage range includes the negative rail, thereby providing superior performance in either single-supply or split-supply applications, even at power supply voltage levels as low as ±2.3 V.
Two external capacitors are required to operate the device; however, the on-chip chopper control circuitry is transparent to the user. On devices in the 14-pin and 20-pin packages, the control circuitry is accessible, allowing the user the option of controlling the clock frequency with an external frequency source. In addition, the clock threshold of the TLC2654M and TLC2654AM requires no level shifting when used in the single-supply configuration with a normal CMOS or TTL clock input.
Innovative circuit techniques used on the TLC2654M and TLC2654AM allow exceptionally fast overload recovery time. An output clamp pin is available to reduce the recovery time further.
The device inputs and output are designed to withstand -100-mA surge currents without sustaining latch-up. In addition, the TLC2654M and TLC2654AM incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015; however, care should be exercised in handling these devices as exposure to ESD may result in degradation of the device parametric performance.
The TLC2654M and TLC2654AM are characterized for operation over the full military temperature range for -55°C to 125°C.
View more information about generic part numbers:TLC2654AM, TLC2654M
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.