SN54125, SN54126, SN54LS125A, SN54LS126A, SN74125, SN74126,SN74LS125A, SN74LS126A QUADRUPLE BUS BUFFERS WITH 3-STATE OUTPUTS

SDLS044 - DECEMBER 1983 - REVISED MARCH 1988

PRODUCTION DATA documents contain information current as of publicationdate. Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily include testingof all parameters.

features

Quad Bus Buffers
3-State Outputs
Separate Control for Each Channel

description

These bus buffers feature three-state outputs that, when enabled, havethe low impedance characteristics of a TTL output with additional drive capabilityat high logic levels to permit driving heavily loaded bus lines without externalpull-up resistors, when disabled, both output transistors are turned off presentinga high-impedance state to the bus so the output will act neither as a significantload nor as a driver. The '125 and 'LS125A outputs are disabled when G ishigh. The 126 and 'LS126A outputs are disabled when G\ is low.

Title: QUADRUPLE BUS BUFFERS WITH 3-STATE OUTPUTS
Product Family: INVERTERS
Device Functionality: QUADRUPLE BUS BUFFER
Orderable Devices: SN54126J, SNJ54126J, SNJ54126W, JM38510/32301B2A, JM38510/32301BCA, JM38510/32301BDA, SN54LS125AJ, SNJ54LS125AFK, SNJ54LS125AJ, SNJ54LS125AW, SN74125N, SN74125N3, SN74126N, SN74LS125AD, SN74LS125ADR, SN74LS125AN, SN74LS125AN3, SN74LS125ANSLE, SN74LS126AD, SN74LS126ADR, SN74LS126AJ, SN74LS126AN

View the complete PDF datasheet: sdls044.pdf (260 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN54126, SN54LS125A, SN74125, SN74126, SN74LS125A, SN74LS126A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.