SDLS023B - JANUARY 1991 - REVISED APRIL 1998
The SN74LS224A 64-bit, low-power Schottky memory is organized as 16 words by 4 bits each. It can be expanded in multiples of 15m + 1 words or 4n bits or both (where n is the number of packages in the vertical array and m is the number of packages in the horizontal array); however, some external gating is required. For longer words the input ready (IR) signals of the first-rank packages and output ready (OR) signals of the last-rank packages must be ANDed for proper synchronization.
A first-in, first-out (FIFO) memory is a storage device that allows data to be written to and read from its array at independent data rates. These FIFOs are designed to process data at rates up to 10MHz in a bit-parallel format, word by word.
Data is written into memory on a low-to-high transition of load-clock (LDCK) and is read out on a low-to-high transition of unload-clock (UNCK). The memory is full when the number of words clocked in exceeds the number of words clocked out by 16. When the memory is full, LDCK signals have no effect on the data residing in memory. When the memory is empty, UNCK signals have no effect.
Status of the FIFO memory is monitored by the IR and OR flags that indicate not-full and not-empty conditions. IR is high only when the memory is not full and the LDCK is low. OR is high only when the memory is not empty and UNCK is high.
A low level on the clear (CLR\) input resets the internal stack-control pointers and also sets IR high and OR low to indicate that old data remaining at the data outputs is invalid. Data outputs are noninverting with respect to the data inputs and are at high impedance when the output-enable (OE) input is low. OE does not affect the IR and OR outputs.
The SN74LS224A is characterized for operation from 0°C to 70°C.
View more information about generic part numbers:SN74LS224A
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.