TP3054B, TP3057B, TP13054B, TP13057B MONOLITHIC SERIAL INTERFACE COMBINED PCM CODEC AND FILTER

SCTS042A - MAY 1990 - REVISED JULY 1996

features

Complete PCM Codec and Filtering Systems Includes:
- Transmit High-Pass and Low-Pass Filtering
- Receive Low-Pass Filter With (sin x)/x Correction
- Active RC Noise Filters
- u-Law or A-Law Compatible Coder and Decoder
- Internal Precision Voltage Reference
- Serial I/O Interface
- Internal Autozero Circuitry
u-Law - TP3054B and TP13054B
A-Law - TP3057B and TP13057B
±5-V Operation
Low Operating Power . . . 50 mW Typ
Power-Down Standby Mode . . . 3 mW Typ
Automatic Power Down
TTL- or CMOS-Compatible Digital Interface
Maximizes Line Interface Card Circuit Density
Improved Versions of National Semiconductor TP3054, TP3057, TP3054-X, TP3057-X

description

The TP3054B, TP3057B, TP13054B, and TP13057B are comprised of a single-chip PCM codec (pulse-code-modulated encoder and decoder) and PCM line filter. These devices provide all the functions required to interface a full-duplex (2-wire) voice telephone circuit with a TDM (time-division-multiplexed) system. These devices are pin-for-pin compatible with the National Semiconductor TP3054B and TP3057B, respectively. Primary applications include:

Line interface for digital transmission and switching of T1 carrier, PABX, and central office telephone systems
Subscriber line concentrators
Digital-encryption systems
Digital voice-band data-storage systems
Digital signal processing

These devices are designed to perform the transmit encoding (A/D conversion) and receive decoding (D/A conversion) as well as the transmit and receive filtering functions in a PCM system. They are intended to be used at the analog termination of a PCM line or trunk. The devices require two transmit and receive master clocks that may be asynchronous (1.536 MHz, 1.544 MHz, or 2.048 MHz), transmit and receive data clocks that are synchronous with the master clock (but can vary from 64 kHz to 2.048 MHz), and transmit and receive frame-sync pulses. The TP3054B, TP3057B, TP13054B, and TP13057B provide the band-pass filtering of the analog signals prior to encoding and after decoding of voice and call progress tones. The TP3054B and TP13054B contain patented circuitry to achieve low transmit channel idle noise and are not recommended for applications in which the composite signals on the transmit side are below -55 dBm0.

The TP3054B and TP3057B are characterized for operation from 0°C to 70°C. The TP13054B and TP13057B are characterized for operation from -40°C to 85°C.

Title: MONOLITHIC SERIAL INTERFACE COMBINED PCM CODEC AND FILTER
Product Family: LINE - CARD CODEC (COMBO)
Device Functionality: MONOLITHIC SERIAL INTERFACE COMBINED PCM CODEC AND FILTER
Orderable Devices: TP13054BDW, TP13054BDWR, TP13054BN, TP13057BDW, TP13057BDWR, TP13057BN, TP3054BDW, TP3054BDWR, TP3054BN, TP3057BDW, TP3057BDWR, TP3057BN

View the complete PDF datasheet: scts042a.pdf (236 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:TP13054B, TP13057B, TP3054B, TP3057B

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.