SN54AHCT16541, SN74AHCT16541 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCLS339D - MARCH 1996 - REVISED JULY 1997

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

features

Members of the Texas Instruments Widebus^TM Family
Inputs Are TTL-Voltage Compatible
EPIC^TM (Enhanced-Performance Implanted CMOS) Process
Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
Flow-Through Architecture Optimizes PCB Layout
High Latch-Up Immunity Exceeds 250 mA Per JESD 17
Package Options Include Plastic 300-mil Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

The 'AHCT16541 are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state.

The SN54AHCT16541 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74AHCT16541 is characterized for operation from -40°C to 85°C.

Title: 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: 16-BIT BUFFER/DRIVER
Orderable Devices: SN74AHCT16541DGGR, SN74AHCT16541DGVR, SN74AHCT16541DL, SN74AHCT16541DLR

View the complete PDF datasheet: scls339d.pdf (101 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74AHCT16541

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.