SCLS122B - DECEMBER 1982 - REVISED MAY 1997
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
The 'HC193 are 4-bit synchronous, reversible, up/down binary counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincidentally with each other when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters.
The outputs of the four flip-flops are triggered on a low-to-high-level transition of either count (clock) input (UP or DOWN). The direction of counting is determined by which count input is pulsed while the other count input is high.
All four counters are fully programmable; that is, each output may be preset to either level by placing a low on the load (LOAD\) input and entering the desired data at the data inputs. The output changes to agree with the data inputs independently of the count pulses. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.
A clear (CLR) input has been provided that forces all outputs to the low level when a high level is applied. The clear function is independent of the count and LOAD\ inputs.
These counters were designed to be cascaded without the need for external circuitry. The borrow (BO\) output produces a low-level pulse while the count is zero (all outputs low) and DOWN is low. Similarly, the carry (CO\) output produces a low-level pulse while the count is maximum (9 or 15) and UP is low. The counters can then be easily cascaded by feeding BO\ and CO\ to DOWN and UP, respectively, of the succeeding counter.
The SN54HC193 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74HC193 is characterized for operation from -40°C to 85°C.
View more information about generic part numbers:SN54HC193, SN74HC193
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.