SCLS099B - DECEMBER 1982 - REVISED MAY 1997
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
The 'HC112 contain two independent J-K negative-edge-triggered flip-flops. A low level at the preset (PRE\) or clear (CLR) inputs sets or resets the outputs regardless of the levels of the other inputs. When PRE\ and CLR\ are inactive (high), data at the J and K inputs meeting the setup time requirements are transferred to the outputs on the negative-going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of CLK. Following the hold-time interval, data at the J and K inputs may be changed without affecting the levels at the outputs. These versatile flip-flops perform as toggle flip-flops by tying J and K high.
The SN54HC112 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74HC112 is characterized for operation from -40°C to 85°C.
View more information about generic part numbers:SN54HC112, SN74HC112
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.