SN54HC74, SN74HC74 DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET

SCLS094B - DECEMBER 1982 - REVISED MAY 1997

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

features

Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs

description

The 'HC74 contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE\) or clear (CLR\) inputs sets or resets the outputs regardless of the levels of the other inputs. When PRE\ and CLR\ are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of CLK. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.

The SN54HC74 is characterized for operation over the full military temperature range -55°C to 125°C. The SN74HC74 is characterized for operation from -40°C to 85°C.

Title: DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET
Product Family: D-TYPE FLIP-FLOPS
Device Functionality: DUAL D-TYPE FLIP-FLOP
Orderable Devices: JM38510/65302B2A, JM38510/65302BCA, JM38510/65302BDA, SN54HC74J, SNJ54HC74FK, SNJ54HC74J, SNJ54HC74W, SN74HC74ADBLE, SN74HC74D, SN74HC74DBLE, SN74HC74DR, SN74HC74N, SN74HC74N3, SN74HC74NSLE, SN74HC74PWLE

View the complete PDF datasheet: scls094b.pdf (90 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN54HC74, SN74HC74

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.