SN74ALVCHS162830 1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS

SCES097D - APRIL 1997 - REVISED JANUARY 1998

features

Member of the Texas Instruments Widebus^TM Family
EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
Diode on Inputs Clamps Overshoot
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Packaged in Thin Very Small-Outline Package

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

This 1-bit to 2-bit address driver is designed for 2.3-V to 3.6-V V_CC operation.

Diodes to V_CC have been added on the inputs to clamp overshoot.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The outputs, which are designed to sink up to 12 mA, include equivalent 26- series resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, the output-enable (OE\) input should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74ALVCHS162830 is characterized for operation from -40°C to 85°C.

Title: 1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: ADDRESS DRIVER
Orderable Devices: SN74ALVCHS162830DBBR

View the complete PDF datasheet: sces097d.pdf (104 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74ALVCHS162830

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.