SCES059B - NOVEMBER 1995 - REVISED SEPTEMBER 1997
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
This 18-bit universal bus transceiver is designed for 2.3-V to 3.6-V VCC operation.
Data flow in each direction is controlled by output-enable (OEAB\ and OEBA\) and clock-enable (CLKENAB\ and CLKENBA\) inputs. For the A-to-B data flow, the data flows through a single register. The B-to-A data can flow through a four-stage pipeline register path, or through a single register path, depending on the state of the select (SEL\) input.
Data is stored in the internal registers on the low-to-high transition of the clock (CLK) input, provided that the appropriate CLKEN\ inputs are low. The A-to-B data transfer is synchronized to the CLKAB input, and B-to-A data transfer is synchronized with the CLK1BA and CLK2BA inputs.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVCH16525 is characterized for operation from -40°C to 85°C.
View more information about generic part numbers:SN74ALVCH16525
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.