



SCES051 - AUGUST 1995
Series Resistors, So No External Resistors Are RequiredEPIC and Widebus are trademarks of Texas Instruments Incorporated.
The SN74ALVC162268 is a 12-bit to 24-bit registered bus exchanger, which is intended for use in applications where data must be transferred from a narrow high-speed bus to a wide, lower-frequency bus. This device is designed specifically for low-voltage (3.3-V) VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC.
The device provides synchronous data exchange between the two ports. Data is stored in the internal registers on the low-to-high transition of the clock (CLK) input when the appropriate clock-enable (CLKEN\) inputs are low. The select (SEL\) line is synchronous with CLK and selects 1B or 2B input data for the A outputs.
For data transfer in the A-to-B direction, a two-stage pipeline is provided in the A-to-1B path with a single storage register in the A-to-2B path. Proper control of these inputs allows two sequential 12-bit words to be presented synchronously as a 24-bit word on the B port. Data flow is controlled by the active-low output enables (OEA\, OEB\). These control terminals are registered so bus direction changes are synchronous with CLK.
The B outputs, which are designed to sink up to 12 mA, include 26-
resistors to reduce overshoot and undershoot.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVC162268 is characterized for operation from -40°C to 85°C.
View more information about generic part numbers:SN74ALVC162268
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.



