SN74LVCH244 OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

SCES009 - JULY 1995

features

EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
Typical V_OHV (Output V_OH Undershoot) > 2 V at V_CC = 3.3 V, T_A = 25°C
ESD Protection Exceeds 2000 V Per MIL-STD-833C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17
Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V V_CC)
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include Shrink Small-Outline (DB), Plastic Small-Outline (DW), and Thin Shrink Small-Outline (PW) Packages
EPIC is a trademark of Texas Instruments Incorporated.

description

This octal buffer/line driver is designed for 2.7-V to 3.6-V V_CC operation; it can interface to a 5-V system environment.

The SN74LVCH244 is organized as two 4-bit line drivers with separate output-enable (OE\) inputs. When OE\ is low, the device passes data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74LVCH244 is characterized for operation from -40°C to 85°C.

Title: OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: OCTAL BUFFER/DRIVER
Orderable Devices: SN74LVCH244DBLE, SN74LVCH244DW, SN74LVCH244PWLE

View the complete PDF datasheet: sces009.pdf (99 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVCH244

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.