CBTLV16210 LOW-VOLTAGE 20-BIT FET BUS SWITCH

SCDS042A - DECEMBER 1997 - REVISED MARCH 1998

features

• 5-Ω Switch Connection Between Two Ports
• Isolation Under Power-Off Conditions
• Package Options Include Plastic Thin Shrink Small-Outline (DGG), Thin Very Small-Outline (DGV), and 300-mil Shrink Small-Outline (DL) Packages

description

The CBTLV16210 provides 20 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device is organized as dual 10-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 10-bit bus switches or one 20-bit bus switch. When OE\ is low, the associated 10-bit bus switch is on and port A is connected to port B. When OE\ is high, the switch is open, and a high-impedance state exists between the two ports.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The CBTLV16210 is characterized for operation from -40°C to 85°C.

View more information about generic part numbers:SN74CBTLV16210

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!