SN74SSTL16847 20-BIT SSTL_3 INTERFACE BUFFER WITH 3-STATE OUTPUTS

SCBS709A - OCTOBER 1997 - REVISED MAY 1998

features

Member of the Texas Instruments Widebus^TM Family
Supports SSTL_3 Signal Inputs and Outputs
Flow-Through Architecture Optimizes PCB Layout
Meets SSTL_3 Class I and Class II Specifications
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Packaged in Plastic Thin Shrink Small-Outline Package
Widebus is a trademark of Texas Instruments Incorporated.

description

This 20-bit buffer is designed for 3-V to 3.6-V V_CC operation and SSTL_3 input levels.

Data flow from A to Y is controlled by the output-enable (OE\). When OE\ is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74SSTL16847 is characterized for operation from 0°C to 70°C.

Title: 20-BIT SSTL_3 INTERFACE BUFFER WITH 3-STATE OUTPUTS
Product Family: MEMORY DRIVERS AND TRANSCEIVERS (SSTL)
Device Functionality: 20-BIT BUFFER

View the complete PDF datasheet: scbs709a.pdf (89 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74SSTL16847

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.