SN54LVTH125, SN74LVTH125 3.3-V ABT QUADRUPLE BUS BUFFERS WITH 3-STATE OUTPUTS

SCBS703C - AUGUST 1997 - REVISED MAY 1998

features

State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static Power Dissipation
Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Support Unregulated Battery Operation Down to 2.7 V
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
High-Impedance State During Power Up and Power Down
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Power Off Disables Outputs, Permitting Live Insertion
Latch-Up Performance Exceeds 500 mA Per JESD 17
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), and Ceramic (J) DIPs

description

These bus buffers are designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The 'LVTH125 devices feature independent line drivers with 3-state outputs. Each output is in the high-impedance state when the associated output-enable (OE\) input is high.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

When V_CC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54LVTH125 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVTH125 is characterized for operation from -40°C to 85°C.

Title: 3.3-V ABT QUADRUPLE BUS BUFFERS WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: QUADRUPLE BUS BUFFER

View the complete PDF datasheet: scbs703c.pdf (117 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVTH125

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.