Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN54LVTZ245, SN74LVTZ245 3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

SCBS303C - DECEMBER 1993 - REVISED JANUARY 1996


 

features

description

These octal bus transceivers are designed specifically forlow-voltage (3.3-V) VCC operation, but with the capabilityto provide a TTL interface to a 5-V system environment.

These devices are designed for asynchronous communication betweendata buses. They transmit data from the A bus to the B bus or fromthe B bus to the A bus, depending upon the logic level at thedirection-control (DIR) input. The output-enable () input can be used to disable thedevices so the buses are effectively isolated.

Active bus-hold circuitry is provided to hold unused or floatingdata inputs at a valid logic level.

The SN74LVTZ245 is available in TI's shrink small-outline package(DB), which provides the same I/O pin count and functionality ofstandard small-outline packages in less than half theprinted-circuit-board area.

The SN54LVTZ245 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. TheSN74LVTZ245 is characterized for operation from -40°C to85°C.

 

 


Title: 3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Product Family: STANDARD TRANSCEIVERS
Device Functionality: OCTAL BUS TRANSCEIVER

View the complete PDF datasheet: scbs303c.pdf (103 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVTZ245

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!