SN54LVTZ240, SN74LVTZ240 3.3-V ABT OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCBS301B - SEPTEMBER 1993 - REVISED JULY 1995

features

• State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low-Static Power Dissipation
• High-Impedance State During Power Up and Power Down
• Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
• Support Unregulated Battery Operation Down to 2.7 V
• Typical V_OLP (Output Ground Bounce)< 0.8 V at V_CC = 3.3 V, T_A = 25°C
• Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
• Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors
• Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), and Ceramic (J) DIPs

description

These octal buffers and line drivers are designed specifically forlow-voltage (3.3-V) V_CC operation, but with the capabilityto provide a TTL interface to a 5-V system environment.

These devices are organized as two 4-bit line drivers withseparate output-enable ()inputs. When is low, thedevice passes data from the A inputs to the Y outputs. When is high, the outputs are in thehigh-impedance state.

Active bus-hold circuitry is provided to hold unused or floatingdata inputs at a valid logic level.

The SN74LVTZ240 is available in TI's shrink small-outline package(DB), which provides the same I/O pin count and functionality ofstandard small-outline packages in less than half theprinted-circuit-board area.

The SN54LVTZ240 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. TheSN74LVTZ240 is characterized for operation from -40°C to85°C.

View more information about generic part numbers:SN74LVTZ240

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!