SN54LVT162244, SN74LVT162244 3.3-V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCBS258D - JUNE 1993 - REVISED JULY 1995

features

Output Ports Have Equivalent 22- Series Resistors, So No External Resistors Are Required
State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low-Static Power Dissipation
Members of the Texas Instruments Widebus^TM Family
Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Support Unregulated Battery Operation Down to 2.7 V
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors
Support Live Insertion
Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
Flow-Through Architecture Optimizes PCB Layout
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings
Widebus is a trademark of Texas Instruments Incorporated.

description

The 'LVT162244 are 16-bit buffers and line drivers designed for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide true outputs and symmetrical active-low output-enable (OE\) inputs.

The outputs, which are designed to source or sink up to 12 mA, include 22- series resistors to reduce overshoot and undershoot.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74LVT162244 is available in TI's shrink small-outline (DL) and thin shrink small-outline (DGG) packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.

The SN54LVT162244 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVT162244 is characterized for operation from -40°C to 85°C.

Title: 3.3.-V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Product Family: INVERTERS
Device Functionality: 16-BIT BUFFER/DRIVER
Orderable Devices: SNJ54LVT162244WD, SN74LVT162244DGGR

View the complete PDF datasheet: scbs258d.pdf (113 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN54LVT162244, SN74LVT162244

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.