SN54ABT32543, SN74ABT32543 36-BIT REGISTERED BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

SCBS230B - JUNE 1992 - REVISED JULY 1994

features

Members of the Texas Instruments Widebus+^TM Family
State-of-the-Art EPIC-IIB^TM BiCMOS Design Significantly Reduces Power Dissipation
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 5 V, T_A = 25°C
Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
High-Drive Outputs (-32-mA I_OH, 64-mA I_OL)
Bus-Hold Inputs Eliminate the Need for External Pullup Resistors
Packaged in 100-Pin Plastic Thin Quad Flat (PZ) Package With 14 × 14-mm Body Using 0.5-mm Lead Pitch
Widebus+ and EPIC-IIB are trademarks of Texas Instruments Incorporated.

description

The ´ABT32543 are 36-bit registered transceivers that contain two sets of D-type latches for temporary storage of data flowing in either direction. These devices can be used as two 18-bit transceivers or one 36-bit transceiver. Separate latch-enable (LEAB\ or LEBA\) and output-enable (OEAB\ or OEBA\) inputs are provided for each register to permit independent control in either direction of data flow.

The A-to-B enable (CEAB\) input must be low in order to enter data from A or to output data from B. If CEAB\ is low and LEAB\ is low, the A-to-B latches are transparent; a subsequent low-to-high transition of LEAB\ puts the A latches in the storage mode. With CEAB\ and OEAB\ both low, the 3-state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar but requires using the CEBA\, LEBA\, and OEBA\ inputs.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN54ABT32543 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT32543 is characterized for operation from -40°C to 85°C

Title: 36-BIT REGISTERED BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Product Family: UNIVERSAL BUS TRANSCEIVERS (UBTS)
Device Functionality: 36-BIT REGISTERED BUS TRANSCEIVER
Orderable Devices: SN74ABT32543PZ

View the complete PDF datasheet: scbs230b.pdf (139 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN54ABT32543, SN74ABT32543

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.