Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN54ABT32245, SN74ABT32245 36-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

SCBS228C - JUNE 1992 - APRIL 1995


features

description

The ŽABT32245 are 36-bit (quad 9-bit) noninverting 3-state transceivers designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.

These devices can be used as four 9-bit transceivers, two18-bit transceivers, or one 36-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control (DIR) inputs. The output-enable (OE\) inputs can be used to disable the device so that the buses are effectively isolated.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or floating data inputs at a valid logic level.

The SN54ABT32245 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT32245 is characterized for operation from -40°C to 85°C.


Title: 36-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Product Family: UNIVERSAL BUS TRANSCEIVERS (UBTS)
Device Functionality: 36-BIT BUS TRANSCEIVER
Orderable Devices: SN74ABT32245PZ

View the complete PDF datasheet: scbs228c.pdf (124 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN54ABT32245, SN74ABT32245

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!