SCBS156B - FEBRUARY 1991 - REVISED JULY 1994
EPIC-IIB is a trademark of Texas Instruments Incorporated.
The ŽABT377 are 8-bit positive-edge-triggered D-type flip-flops with a clock (CLK) input. They are particularly suitable for implementing buffer and storage registers, shift registers, and pattern generators.
Data (D) input information that meets the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse if the common clock-enable (CLKEN\) input is low. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the buffered clock (CLK) input is at either the high or low level, the D input signal has no effect at the output. The circuits are designed to prevent false clocking by transitions at CLKEN\.
The SN74ABT377 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area.
The SN54ABT377 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT377 is characterized for operation from -40°C to 85°C.
View more information about generic part numbers:SN74ABT377
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.