SN54LVT273, SN74LVT273 3.3-V ABT OCTAL D-TYPE FLIP-FLOPS WITH CLEAR

SCBS136E - MAY 1992 - REVISED JULY 1995

features

State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low-Static Power Dissipation
Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Support Unregulated Battery Operation Down to 2.7 V
Buffered Clock and Direct Clear Inputs
Individual Data Input to Each Flip-Flop
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), and Ceramic (J) DIPs

description

These octal D-type flip-flops are designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The ´LVT273 are positive-edge-triggered flip-flops with a direct clear input. Information at the data (D) inputs meeting the setup-time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock (CLK) input is at either the high or low level, the D-input signal has no effect at the output.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74LVT273 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area.

The SN54LVT273 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVT273 is characterized for operation from -40°C to 85°C.

Title: 3.3-V ABT OCTAL D-TYPE FLIP-FLOPS WITH CLEAR
Product Family: D-TYPE FLIP-FLOPS
Device Functionality: OCTAL D-TYPE FLIP-FLOP

View the complete PDF datasheet: scbs136e.pdf (117 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVT273

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.