Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN54LVT240A, SN74LVT240A 3.3-V ABT OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCBS134H - SEPTEMBER 1992 - REVISED AUGUST 1997


features

description

These octal buffers and line drivers are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

These devices are organized as two 4-bit buffer/line drivers with separate output-enable (OE\) inputs. When OE\ is low, the devices pass data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54LVT240A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVT240A is characterized for operation from -40°C to 85°C.


Title: 3.3-V ABT OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Product Family: INVERTERS
Device Functionality: OCTAL BUFFER/DRIVER
Orderable Devices: SN74LVT240ADBR, SN74LVT240ADW, SN74LVT240ADWR, SN74LVT240APWR

View the complete PDF datasheet: scbs134h.pdf (111 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVT240A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!