Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN54ABT16541, SN74ABT16541 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCBS118B - FEBRUARY 1991 - REVISED JULY 1994


features

description

The ŽABT16541 are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74ABT16541 is available in TI's shrink small-outline package (DL), which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.

The SN54ABT16541 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16541 is characterized for operation from -40°C to 85°C.


Title: 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: 16-BIT BUFFER/DRIVER
Orderable Devices: SN74ABT16541DGGR, SN74ABT16541DL, SN74ABT16541DLR

View the complete PDF datasheet: scbs118b.pdf (110 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74ABT16541

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!