SN54ABT374, SN74ABT374A OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

SCBS111G - FEBRUARY 1991 - REVISED JANUARY 1997

Please be aware that an important notice concerningavailability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers theretoappears at the end of this data sheet.

features

State-of-the-Art EPIC-IIB^TM BiCMOS Design Significantly Reduces Power Dissipation
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Typical V_OLP (Output Ground Bounce) < 1 V at V_CC = 5 V, T_A = 25°C
High-Drive Outputs (-32-mA I_OH, 64-mA I_OL)
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), Plastic (N) and Ceramic (J) DIPs, and Ceramic Flat (W) Package

EPIC-IIB is a trademark of Texas Instruments

description

These 8-bit flip-flops feature 3-state outputs designedspecifically for driving highly capacitive or relativelylow-impedance loads. They are particularly suitable for implementingbuffer registers, I/O ports, bidirectional bus drivers, and workingregisters.

The eight flip-flops of the SN54ABT374 and SN74ABT374A areedge-triggered D-type flip-flops. On the positive transition of theclock (CLK) input, the Q outputs are set to the logic levels set upat the data (D) inputs.

A buffered output-enable () input can be used to place the eight outputs in eithera normal logic state (high or low logic levels) or a high-impedancestate. In the high-impedance state, the outputs neither load nordrive the bus lines significantly. The high-impedance state andincreased drive provide the capability to drive bus lines withoutneed for interface or pullup components. does not affect internaloperations of the flip-flop. Old data can be retained or new data canbe entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, should be tiedto V_CC through a pullup resistor; the minimum value of theresistor is determined by the current-sinking capability of thedriver.

The SN54ABT374 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. TheSN74ABT374A is characterized for operation from -40°C to85°C.

Title: OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
Product Family: D-TYPE (3-STATE) FLIP-FLOPS
Device Functionality: OCTAL D-TYPE FLIP-FLOP
Orderable Devices: SNJ54ABT374FK, SNJ54ABT374J, SNJ54ABT374W, SN74ABT374ADBLE, SN74ABT374ADW, SN74ABT374ADWR, SN74ABT374AN, SN74ABT374APWLE

View the complete PDF datasheet: scbs111g.pdf (102 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN54ABT374, SN74ABT374A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.