Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN54ABT640, SN74ABT640 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

SCBS104C - FEBRUARY 1991 - REVISED JANUARY 1997


Please be aware that an important notice concerningavailability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers theretoappears at the end of this data sheet.

features

 

EPIC-IIB is a trademark of Texas Instruments

description

The 'ABT640 bus transceivers are designed for asynchronouscommunication between data buses. These devices transmit inverteddata from the A bus to the B bus or from the B bus to the A bus,depending on the level at the direction-control (DIR) input. Theoutput-enable () input can beused to disable the device so that the buses are effectivelyisolated.

To ensure the high-impedance state during power up or power down,should be tiedto VCC through a pullup resistor; the minimum value of theresistor is determined by the current-sinking capability of thedriver.

The SN54ABT640 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. TheSN74ABT640 is characterized for operation from -40°C to85°C.

 

 


Title: OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Product Family: STANDARD TRANSCEIVERS
Device Functionality: OCTAL BUS TRANSCEIVER
Orderable Devices: SN74ABT640DBLE, SN74ABT640DW, SN74ABT640DWR, SN74ABT640N

View the complete PDF datasheet: scbs104c.pdf (102 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74ABT640

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!