SN54ABT5400, SN74ABT5400 11-BIT LINE/MEMORY DRIVERS WITH 3-STATE OUTPUTS

SCBS094B - DECEMBER 1991 - JULY 1994

features

Output Ports Have 25- Series Resistors, So No External Resistors Are Required
State-of-the-Art EPIC-IIB^TM BiCMOS Design Significantly Reduces Power Dissipation
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Typical V_OLP (Output Ground Bounce) < 1 V at V_CC = 5 V, T_A = 25°C
Typical V_OLV (Output Undershoot) < 0.5 V at V_CC = 5 V, T_A = 25°C
Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK) and DIPs (JT)

EPIC-IIB is a trademark of Texas Instruments

description

These 11-bit buffers and line drivers are designed specifically toimprove both the performance and density of 3-state memory addressdrivers, clock drivers, and bus-oriented receivers and transmitters.

The 3-state control gate is a 2-input AND gate with active-lowinputs so that if either output-enable ( or ) input is high, all 11 outputs arein the high-impedance state.

The outputs, which are designed to source or sink up to 12 mA,include 25- seriesresistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, should be tiedto V_CC through a pullup resistor; the minimum value of theresistor is determined by the current-sinking capability of thedriver.

The SN54ABT5400 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. TheSN74ABT5400 is characterized for operation from -40°C to85°C.

Title: 11-BIT LINE/MEMORY DRIVERS WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: 11-BIT LINE/MEMORY DRIVER
Orderable Devices: SN74ABT5400DW, SN74ABT5400DWR

View the complete PDF datasheet: scbs094b.pdf (109 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74ABT5400

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.