SN74BCT29844 9-BIT BUS-INTERFACE D-TYPE LATCH WITH 3-STATE OUTPUTS

SCBS077A - SEPTEMBER 1991 - REVISED NOVEMBER 1993

features

• State-of-the-Art BiCMOS Design Significantly Reduces I_CCZ
• ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
• Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic 300-mil DIPs (NT)

description

The SN74BCT29844 features 3-state outputs designed specificallyfor driving highly capacitive or relatively low-impedance loads. Itis particularly suitable for implementing wider buffer registers, I/Oports, bidirectional bus drivers with parity, and working registers.

The nine latches are transparent D-type latches. When thelatch-enable (LE) input is high, the Q outputs are complementary tothe inverting data (D\) inputs.

A buffered output-enable () input can be used to place the nine outputs in eithera normal logic state (high or low level) or a high-impedance state.In the high-impedance state, the outputs neither load nor drive thebus lines significantly. The high-impedance state and increased driveprovide the capability to drive bus lines without need for interfaceor pull-up components.

The output enable ()does not affect the internal operation of the flip-flops. Old datacan be retained or new data can be entered while the outputs are inthe high-impedance state.

The SN74BCT29844 is characterized for operation from 0°C to70°C.

View more information about generic part numbers:SN74BCT29844

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!