Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN74LVC2244A OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

SCAS572E - APRIL 1996 - REVISED JANUARY 1998


features

EPIC is a trademark of Texas Instruments Incorporated.

description

This octal buffer/line driver is designed for 2.7-V to 3.6-V VCC operation.

The SN74LVC2244A is organized as two 4-bit line drivers with separate output-enable (OE\) inputs. When OE\ is low, the device passes data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74LVC2244A is characterized for operation from -40°C to 85°C.


Title: OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: OCTAL BUFFER/DRIVER
Orderable Devices: SN74LVC2244ADBLE, SN74LVC2244ADW, SN74LVC2244ADWR, SN74LVC2244APWLE

View the complete PDF datasheet: scas572e.pdf (86 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVC2244A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!