SN74LVC4245 OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS

SCAS375C - MARCH 1994 - REVISED JANUARY 1997

Please be aware that an important notice concerningavailability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers theretoappears at the end of this data sheet.

features

EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
3.3-V to 5-V Bidirectional Level Shifter
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages

EPIC is a trademark of Texas Instruments

description

This 8-bit (octal) noninverting bus transceiver contains twoseparate supply rails; B port has V_CCB, which is set at3.3 V, and A port has V_CCA, which is set at 5 V. Thisallows for translation from a 3.3-V to a 5-V environment, and viceversa.

The SN74LVC4245 is designed for asynchronous communication betweendata buses. The device transmits data from the A bus to the B bus orfrom the B bus to the A bus, depending on the logic level at thedirection-control (DIR) input. The output-enable input can be used to disable thedevice so the buses are effectively isolated.

The SN74LVC4245 pinout allows the designer to switch to a normalall-3.3-V or all-5-V 20-pin '245 device without board re-layout. Thedesigner uses the datapaths for pins 2 through 11 and 14 through 23of the SN74LVC4245 to achieve the conventional '245 layout.

The SN74LVC4245 is characterized for operation from -40°C to85°C.

Title: OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS
Product Family: STANDARD TRANSCEIVERS
Device Functionality: OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER

View the complete PDF datasheet: scas375c.pdf (104 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVC4245

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.