Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

SN74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

SCAS313F - NOVEMBER 1993 - REVISED JANUARY 1998


features

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

This 16-bit buffer/driver is designed for 2.7-V to 3.6-V VCC operation.

The SN74LVCH16244A is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE\) inputs.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74LVCH16244A is characterized for operation from -40°C to 85°C.


Title: 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: 16-BIT BUFFER/DRIVER
Orderable Devices: SN74LVCH16244ADGGR, SN74LVCH16244ADL, SN74LVCH16244ADLR

View the complete PDF datasheet: scas313f.pdf (100 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVCH16244A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!