



SCAS311E - JANUARY 1993 - REVISED JANUARY 1998
EPIC is a trademark of Texas Instruments Incorporated.
This octal bus transceiver and register is designed for 2.7-V to 3.6-V VCC operation.
The SN74LVC2952A consists of two 8-bit back-to-back registers that store data flowing in both directions between two bidirectional buses. Data on the A or B bus is stored in the registers on the low-to-high transition of the clock (CLKAB or CLKBA) input, provided that the clock-enable (CLKENAB\ or CLKENBA\) input is low. Taking the output-enable (OEAB\ or OEBA\) input low accesses the data on either port.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN74LVC2952A is characterized for operation from -40°C to 85°C.
View more information about generic part numbers:SN74LVC2952A
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.



