SN74LVC827A 10-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

SCAS306F - MARCH 1993 - REVISED JANUARY 1998

features

• EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
• Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
• Typical V_OHV (Output V_OH Undershoot) > 2 V at V_CC = 3.3 V, T_A = 25°C
• Power Off Disables Outputs, Permitting Live Insertion
• Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V V_CC)
• ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages

EPIC is a trademark of Texas Instruments Incorporated.

description

This 10-bit buffer/bus driver is designed for 2.7-V to 3.6-V V_CC operation.

The SN74LVC827A provides a high-performance bus interface for wide datapaths or buses carrying parity.

The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all ten outputs are in the high-impedance state. The SN74LVC827A provides true data at its outputs.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74LVC827A is characterized for operation from -40°C to 85°C.

View more information about generic part numbers:SN74LVC827A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!