SN74LVC821 10-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS

SCAS304A - MARCH 1993 - REVISED JULY 1995

features

EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
Typical V_OHV (Output V_OH Undershoot) > 2 V at V_CC = 3.3 V, T_A = 25°C
Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages
Inputs Accept Voltages to 5.5 V
EPIC is a trademark of Texas Instruments Incorporated.

description

This 10-bit bus-interface flip-flop is designed for 2.7-V to 3.6-V V_CC operation.

The SN74LVC821 features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers.

The ten flip-flops are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the device provides true data at the Q outputs.

A buffered output-enable (OE\) input can be used to place the ten outputs in either a normal logic state (high or low level) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.

The output-enable (OE\) input does not affect the internal operations of the latch. Previously stored data can be retained or new data can be entered while the outputs are in the high-impedance state.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74LVC821 is characterized for operation from -40°C to 85°C.

Title: 10-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS
Product Family: D-TYPE (3-STATE) FLIP-FLOPS
Device Functionality: BUS INTERFACE
Orderable Devices: SN74LVC821DBLE, SN74LVC821DW, SN74LVC821DWR, SN74LVC821PWLE

View the complete PDF datasheet: scas304a.pdf (70 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVC821

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.